Getting started
Dynamic Load Management allows managing multiple chargers on a site that has restrictions on the level of current that can be used due to fuse or other limitations. DLM allows you to set up the max current the site can use and then dynamically adjusts the currents for each socket on the site based on how much current is available.
eMabler Dynamic Load Management is working only with chargers that support Smart Charging Profiles
Smart charging is a method of optimizing charging schedules and power usage to minimize energy costs and ensure on-time vehicle departures.
By using Dynamic Load Management following benefits are achieved:
- Utilize the limited current to its fullest
- Even with smaller fuse sizes better service level can be achieved
- Cost savings
- No need to update electrical infrastructure to add more chargers
- Manufacturer independent
- eMabler DLM uses Smart Charging Profiles to manage load management, which allows to use different chargers from different manufacturers on the same site
- Use of external meters
- By adding external meter to DLM you can take other current usage in site into consideration when protecting fuses
Dynamic Load Management is enabled on site settings and follows the site structure, so please create the sites in eMabler UI to match the real world electrical circuits.